For ProfessionalsTILE ADH
Ceramic Adhesive Mortar
DESCRIPTION
The product is a cement-based, single-component adhesive mortar with reduced slippage properties, and is used for tiles and ceramics.
It conforms to TS EN 12004 C1T standard.
C. Cement-based, 1: Standard performance, T: Reduced slippage.
TECHNICAL SPECIFICATIONS
| Appearance | Grey |
| Mixing Ratio | 6-7 liters of water / 25 kg |
| Amount of Consumption | 4-5 kg/m2 |
| Application Temperature | +5oC to+35oC |
| Rest Time under Exposed Conditions | 30 minutes |
| Maturation Period | 5-10 minutes |
| Toxicity | Non-toxic |
| Splice Strength | ≥ 0.5 N/mm2 |
| Slippage | < 0.5 mm |
| After Immersed Into Water | ≥ 0.5 N/mm2 |
| After Thermally Aged | ≥ 0.5 N/mm2 |
| Temperature Resistance | - 40oC to + 80oC |
| Fire Reaction | A1 |
| * The above values are valid for + 23oC and 50% relative humidity. The time is shortened at high temperatures and extended at low temperatures. | |
AREAS OF USE
The product is used for horizontal and vertical applications of ceramic, tile, and marble items to cement-based surfaces. It can be used at interior spaces of all buildings.
BENEFITS
It is easy to prepare and apply. It gives proper working time. It does not lead to drift at vertical applications. It has high adhesion properties.
INSTRUCTIONS FOR USE
Residues that will prevent adhesion on the surface should be removed. 25 kg of EKOKAT TILE ADH is slowly poured into 6-7 liters of water and is then mixed with a low speed (400-600 rpm) mixer. The homogenous mortar is allowed to rest for 5-10 minutes and then mixed again once before application. The mixture should be used in one hour. The mortar is notched with a notched trowel that is suitable for tile dimensions. Tiles are affixed to the notched mortar in 20 minutes. The mortar should not be used if its usage time has expired and it has been scabbed. The mortar should be applied at the specified application temperature, and protected from direct sun, wind and frost. The joint application is performed on walls after 24 hours, or on floors after 48 hours.
PACKAGING
25 craft bags (PE reinforced)
64 shrink bags on one palette (110x110 cm).
STORAGE CONDITIONS AND SHELF LIFE
No more than two palettes should be placed on top of each other in their unopened original packaging, in a cool and dry environment. Shelf life is 12 months from date of production under suitable storage conditions.
SAFETY MEASURES
Work clothes, protective gloves, goggles, and masks suitable for workers health and safety should be used during the application. Due to irritant effects of uncured material, it should be washed with plenty of water and soap immediately in case of contact with skin and eyes. If swallowed, seek medical advice immediately. No food and drink should be brought into application areas. Store it out of reach of children. Please refer to the safety data sheet for further information.
RESPONSIBILITY
Our Company may not be held liable for any application errors that might be suffered if the product is not used for its intended purposes, or if it is failed to conform to the conditions and proposals specified above regarding technical application. This technical data sheet contains information that is current as of the date of issuance hereof. The manufacturer hereby reserves its right to change this data sheet at any time.
It conforms to TS EN 12004 C1T standard.
- EK 1001.010.25
- Grey
