AQUA WP – CR

PRODUCT DESCRIPTION

It is a cement-based, single component, crystallized waterproofing mortar containing mineral aggregates of a special particle size, chemical additives enhancing product performance, and a capillary effect, which is effective against leaky surface waters and can be applied from inside and outside.

TECHNICAL SPECIFICATIONS

AREAS OF USE

It can be used safely for waterproofing, vertically and horizontally, of foundation curtains, concretes, water tanks, tunnels, retaining walls, interior and exterior spaces, especially at wet spaces, toilets, and bathrooms of buildings.

BENEFITS

It is easy to prepare and apply. It gives proper working time. It does not lead to drift at vertical applications. It has high adhesion properties. It is resistant to freeze-thaw cycling. It can be applied with a brush or a trowel. Due to its crystallization, it gives full waterproofing by filling capillaries. It protects concrete and equipments from water corrosion.

INSTRUCTIONS FOR USE

Before starting the insulation process, the surface should be cleaned from foreign matters and get moistened. Pores should be made on the surface in order to enhance adherence. The application surface should be saturated with water one day in advance and the product should be applied when it is moist. 25 kg of EKOKAT AQUA WP – CR crystalized waterproofing mortar is poured slowly into 6.5 – 7 liters of clean water, and then mixed with a low speed mixer or a trowel until a homogeneous mixture is obtained. It is mixed again after a rest time of 5 minutes. Corner joints present at places of application are ovalized. It is applied on pre-moistened surface with a brush or a trowel. If the first coat has reached an adequate hardness without losing its water and before crystallization has commenced, then the second coat is applied. This time is 3-5 hours depending on ambient temperature. Application should be done within 20-25 minutes. Do not apply at temperatures above +35°C or below +5°C. The plaster should be applied on the affixed insulation boards two days later. These values are valid for a surface and ambient temperature of 20oC. The time is shortened at high temperatures and extended at low temperatures.

PACKAGING

25 kg PE reinforced craft bags.
64 shrink bags on one palette (110x110 cm)

STORAGE CONDITIONS AND SHELF LIFE

No more than two palettes should be placed on top of each other in their unopened original packaging, in a cool and dry environment. Shelf life is 12 months from date of production under suitable storage conditions.

SAFETY MEASURES

Work clothes, protective gloves, goggles and masks suitable for workers health and safety should be used during the application. Due to irritant effects of uncured material, it should be washed with plenty of water and soap immediately in case of contact with skin and eyes. If swallowed, seek medical advice immediately. No food and drink should be brought into application areas. Store it out of reach of children. Please refer to the safety data sheet for further information.

RESPONSIBILITY

Our Company may not be held liable for any application errors that might be suffered if the product is not used for its intended purposes, or if it is failed to conform to the conditions and proposals specified above. regarding technical application. This technical data sheet contains information that is current as of the date of issuance hereof. The manufacturer hereby reserves its right to change this data sheet at any time.

It conforms to TS EN 14891 standard.