For ProfessionalsGRANICER ADH
Adhesive Mortar for Granite and Ceramic
DESCRIPTION
The product is a cement-based, high performance, and single component adhesive mortar with reduced slippage properties, which is used for granite and ceramic materials.
It conforms to TS EN 12004 and C2T standards
C: Cement-based , 2: High performance, T: Reduced slippage.
TECHNICAL SPECIFICATIONS
| Appearance | Grey |
| Mixing Ratio | 6-7 liters of water / 25 kg |
| Amount of Consumption | 4-5 kg/m2 |
| Application Temperature | +5oC to+35oC |
| Rest Time under Exposed Conditions | 35 minutes |
| Maturation Period | 5-10 minutes |
| Toxicity | Non-toxic |
| Splice Strength | > 1 N/mm2 |
| Slippage | ≤ 0.5 mm |
| After Immersed Into Water | ≥ 1 N/mm2 |
| After Thermally Aged | ≥ 1 N/mm2 |
| Temperature Resistance | - 40oC to + 80oC |
| Fire Reaction | A1 |
| * The above values are valid for + 23oC and 50% relative humidity. The time is shortened at high temperatures and extended at low temperatures. | |
AREAS OF USE
It is used for the bonding of coating materials such as granite, ceramic, natural granite, large-sized ceramic, porcelain ceramic, clinker, cotto, natural stones, and etc. at interior and exterior spaces of all buildings.
BENEFITS
It is resistant to water and frost. It shows no cracking, no fouling, or no stain. It is hygienic and can be colored. It is easy to prepare and apply. It does not lead to drift at vertical applications. It has high adhesion properties.
INSTRUCTIONS FOR USE
Residues that will prevent adhesion on the surface should be cleaned. 25 kg of EKOKAT GRANICER ADH is slowly poured into 6-7 liters of water and is then mixed with a low speed (400-600 rpm) mixer. The homogenous mortar is allowed to rest for 5 to 10 minutes and then mixed again once before application. The mixture should be used in one hour. The mortar should be notched with a notched trowel suitable for the tile dimensions. Ceramics should be glued to the notched mortar in 30 minutes. The mortar should not be used if its usage time has expired and it has been scabbed. The mortar should be applied at the specified application temperature, and protected from direct sun, wind and frost. Joint application should be done on the wall 12 hours later and on the floor 24 hours later.
PACKAGING
25 craft bags (PE reinforced)
64 shrink bags on one palette (110x110 cm).
STORAGE CONDITIONS AND SHELF LIFE
No more than two palettes should be placed on top of each other in their unopened original packaging, in a cool and dry environment. Shelf life is 12 months from date of production under suitable storage conditions.
SAFETY MEASURES
Work clothes, protective gloves, goggles, and masks suitable for workers health and safety should be used during the application. Due to irritant effects of uncured material, it should be washed with plenty of water and soap immediately in case of contact with skin and eyes. If swallowed, seek medical advice immediately. No food and drink should be brought into application areas. Store it out of reach of children. Please refer to the safety data sheet for further information.
RESPONSIBILITY
Our Company may not be held liable for any application errors that might be suffered if the product is not used for its intended purposes, or if it is failed to conform to the conditions and proposals specified above regarding technical application. This technical data sheet contains information that is current as of the date of issuance hereof. The manufacturer hereby reserves its right to change this data sheet at any time.
TS EN 12004, C2T standardına uygundur.
- EK 1003.010.25
- Grey
- EK 1003.020.25
- White
