AQUA WP – BA 2C

PRODUCT DESCRIPTION    

The product is a bitumen acrylic-based, two-component, elastic, and solvent-free waterproofing material.

TECHNICAL SPECIFICATIONS

AREAS OF USE

It is used as a waterproofing material against ground waters at foundations, curtain walls, wet areas, balconies, terraces, underground car parks, and garden terraces of all buildings.

APPLICATION SURFACES

Cement-based mineral plasters and screeds, and gross concrete surfaces.

NOTE: It is not applied on metal surfaces.

BENEFITS

It has high elasticity and crack bridging capability, can be applied to all mineral surfaces easily and quickly, and does not contain solvent and asbestos fiber.

INSTRUCTIONS FOR USE

The surface must be cleaned from materials such as dust, cement, mortar residues, paint, mold oil that will prevent adhesion, and the surface must be solid and dry. No application should be made in rainy weather or on wet and frosted surfaces. Damaged surfaces should be repaired with EKOKAT REAPAIR THN, and horizontal and vertical corners should be beveled with a repair mortar. To achieve better performance from the product, EKOKAT AQUA WP - BA 2C should be mixed with water at the ratio of 1/5 thoroughly, and applied as a primer coat with a brush.

Application should be performed between + 5⁰ C and + 35⁰ C. The liquid component in the bucket is mixed with a low speed (400-500 rpm) mixer, and the powder component must be slowly added into the liquid component and mixed until a homogeneous, lump-free mixture is obtained. Once the primer is dry, it is applied in 2 - 4 mm thickness with brush or trowel.

The first coat should be allowed to dry for application of the second coat. In order to increase the mechanical properties of the application, it is advisable to apply a glass fiber net of 100 g / m ² between the coats. The applied surfaces should be protected from rain, frost and direct sunlight for 24 hours.

Note: For insulation of foundations, the application surface must be protected from mechanical damages by means of thermal insulation boards, drainage boards, and braided walls before filling. The earthfill works should be done after the material has been fully cured.

Application tools should be cleaned with water after application.

PACKAGING

32 kg combi plastic buckets (24 kg liquid and 8 kg powder components) 

APPLICATION TOOLS

Mixer, trowel, spatula

STORAGE CONDITIONS AND SHELF LIFE

No more than three buckets should be placed on top of each other in their unopened original packaging, in a cool and dry environment. Avid from exposure to direct sunlight or frost. Shelf life is 12 months from date of production under suitable storage conditions. Date of production and charge number is specified on packaging.

SAFETY MEASURES

Work clothes, protective gloves, goggles and masks suitable for workers health and safety should be used during the application. Due to irritant effects of uncured material, it should be washed with plenty of water and soap immediately in case of contact with skin and eyes. If swallowed, seek medical advice immediately. No food and drink should be brought into application areas. Store it out of reach of children. Please refer to the safety data sheet for further information.

RESPONSIBILITY

Our company may not be held liable for any application errors that might be suffered if the product is not used for its intended purposes, or if it is failed to conform to the conditions and proposals specified above regarding technical application. This technical data sheet contains information that is current as of the date of issuance hereof. The manufacturer hereby reserves its right to change this data sheet at any time.