For ProfessionalsPRIMER INTO - GPS
Transparent Plaster Primer with Silicon for Inner Walls
DESCRIPTION
Akrilik emülsiyon esaslı, silikonlu, alçı yüzeylerin boya öncesi uygulamalarında kullanılan şeffaf astardır.
PROPERTIES
Kullanıma hazırdır. Alçı yüzeylerin boyaya iyi yapışmasını sağlar. Alçı yüzeylerin emiciliğini azaltarak ani su kaybını önler. Uygulanacak boyanın tüketim miktarını azaltır. Sıcak havalarda boyanın erken kuruyarak çatlamasını önler. Dolgusuz yapısı ile yüzeye yüksek nüfuz edebilme kabiliyeti sayesinde yüzeyi sağlamlaştırır.
TECHNICAL SPECIFICATIONS
| Structure | Acrylic emulsion-based |
| Color | Transparent |
| Thinner | Water |
| Amount of Consumption absorbency | 0,100 liters/m depending upon surface roughness and absorbency (single coat) |
| Drying Time | 6 hours for paint applications |
| Application Temperature | +5oC to +35oC |
|
* The above values are valid for + 23oC and 50% relative humidity. The time is shortened at high temperatures and extended at low temperatures. |
|
AREAS OF USE
It is used as an emulsion-based paint primer on porous surfaces with high absorbency such as satin, plaster panel, and paste.
BENEFITS
It is easy to prepare and apply. It is ready for use. It provides high adherence to concrete and plaster-applied surfaces. It is resistant to water and frost. It is not affected from temperature differences.
INSTRUCTIONS FOR USE
Dust, swollen coats, dirt, oil, etc. present on application surfaces must be cleaned from the surface. Surfaces with old paints and synthetic surfaces should be cleaned thoroughly. Surfaces should be repaired using EKOKAT PASTE INTO – TCK, if necessary. EKOKAT PRIMER INTO – GPS should be mixed thoroughly before application. EKOKAT PRIMER INTO - GPS should be diluted with water at the ratio of 15 to 20% by volume and mixed well until it becomes homogenous. It should be applied as a single coat by means of a brush, a roll, or a spraying system. A rest time of at least 6 hours should be allowed to lapse before application of paint. The ambient temperature and the temperature of the application surface should be at least +5oC during the application as well as for at least 24 hours thereafter. Application tools should be washed with water immediately after use.
APPLICATION TOOLS
Roll, brush
PACKAGING
20 kg plastic buckets
STORAGE CONDITIONS AND SHELF LIFE
No more than three buckets should be placed on top of each other in their unopened original packaging, in a cool and dry environment. Shelf life is 12 months from date of production under suitable storage conditions.
SAFETY MEASURES
Work clothes, protective gloves, goggles, and masks suitable for workers health and safety should be used during the application. It should be washed with plenty of water and soap immediately in case of contact with skin and eyes. If swallowed, seek medical advice immediately. No food and drink should be brought into application areas. Store it out of reach of children. Please refer to the safety data sheet for further information.
RESPONSIBILITY
Our Company may not be held liable for any application errors that might be suffered if the product is not used for its intended purposes, or if it is failed to conform to the conditions and proposals specified above regarding technical application. This technical data sheet contains information that is current as of the date of issuance hereof. The manufacturer hereby reserves its right to change this data sheet at any time.
- EC.412.000.20
- Transparent
