For ProfessionalsRAPID ADH
Fast Setting Adhesive Mortar for Ceramics
DESCRIPTION
The product is a cement-based, fast hardening, high performance, and fast setting adhesive mortar with special chemical additives enhancing product performance, which is used for bonding of ceramic tiles, granite, marble, and natural stones.
It conforms to TS EN 12004 and C2F standards.
C2: Cement-based, High Performance Properties, F: Fast Setting.
TECHNICAL SPECIFICATIONS
| Appearance | Grey |
| Mixing Ratio | 6-7 liters / 25 kg |
| Amount Of Consumption | 4-5 kg/m2 |
| Application Temperature | +5oC to +35oC |
| Rest Time Under Exposed | 15 minutes |
| Maturation Period | 3 hours |
| Toxicity | Non-toxic |
| Splice Strength | > 1 N/mm2 |
| Slippage | ≤ 0.5 mm |
| After Immersed Into Water | ≥ 1 N/mm2 |
| After Thermally Aged | ≥ 1 N/mm2 |
| Temperature Resistance | - 40oC to + 80oC |
| Fire Reaction | A1 |
| Time Before Walk On | 3 hours |
| Time Before Availability For Traffic | 24 hours |
|
* The above values are valid for + 23oC and 50% relative humidity. The time is shortened at high temperatures and extended at low temperatures. * If the temperature of the application surface is above +25 ° C, then the surface should be moistened. |
|
AREAS OF USE
The product is used to apply ceramic, granite ceramic, granite, marble, and natural stone materials on concrete surfaces horizontally at interior and exterior spaces where fast application is needed. It is also used on balconies, terraces, and wet spaces.
BENEFITS
It is easy to prepare and apply. It sets fast. It has high adhesion strength. It is resistant to freeze-thaw cycling.
INSTRUCTIONS FOR USE
Care must be taken to ensure that the application surface is sound, dry, dust-free, and clean. Residues that will prevent adhesion on the surface should be cleaned. 25 kg of EKOKAT RAPID ADH is slowly poured into 6-7 liters of water and is then mixed with a low speed (400-600 rpm) mixer. The lump-free and homogenous mortar should be used in 10 minutes. The mortar should be notched with a notched trowel suitable for the tile dimensions. The mortar should not be used if its usage time has expired and it has been scabbed. The mortar should be applied at the specified application temperature, and protected from direct sun, wind and frost. Joint application can start three hours later.
PACKAGING
25 craft bags (PE reinforced)
64 shrink bags on one palette (110x110 cm).
STORAGE CONDITIONS AND SHELF LIFE
No more than two palettes should be placed on top of each other in their unopened original packaging, in a cool and dry environment. Shelf life is 12 months from date of production under suitable storage conditions.
SAFETY MEASURES
Work clothes, protective gloves, goggles, and masks suitable for workers health and safety should be used during the application. Due to irritant effects of uncured material, it should be washed with plenty of water and soap immediately in case of contact with skin and eyes. If swallowed, seek medical advice immediately. No food and drink should be brought into application areas. Store it out of reach of children. Please refer to the safety data sheet for further information.
RESPONSIBILITY
Our Company may not be held liable for any application errors that might be suffered if the product is not used for its intended purposes, or if it is failed to conform to the conditions and proposals specified above regarding technical application. This technical data sheet contains information that is current as of the date of issuance hereof. The manufacturer hereby reserves its right to change this data sheet at any time.
It conforms to TS EN 12004 and C2F standards.
- EK 1005.010.25
- Grey
